SKILL LEVEL beginner
by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
If you use a tile mat as we did (we used Bondera), begin by laying out your tile pattern on top of the mat before removing the top liner. Mark the lines on your tile which will need to be cut to fit within your layout. Mount the SM540 wheel onto your Dremel Saw-Max tool. With your tile clamped onto your work area, make a smooth pass along the marked line, following the notch at the front of your tool to ensure an accurate cut.
Next, prep your wall, making sure it is clean and dry. Typically, tile mats can be applied to any flat, smooth, stable surface.
Finally, place your tiles on the mat, applying firm pressure for 5 seconds.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.