SKILL LEVEL intermediate
by Dremel ®
Tools & Accessories
1Spray Adhesive- Optional
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Create your picture frame design, whether by freehand drawing or searching online. We have supplied ours to print as well. Then spray adhesive onto your pattern and source to your 1/4" wood.
Next, drill corners and holes into the perimeter design in the areas that may be tougher to get to with the Moto-Saw.
Now cut out the rest of the perimeter design using the Moto-Saw. Optional: Use the Ultra-Saw to cut out the bottom of the frame, or continue using the Moto-Saw.
Now you are ready to cut two front-frame pieces with the dimensions 1/4" x 1" x 10" with your Ultra-Saw. Cut two more front-frame pieces with the dimensions 1/4" x 1" x 7 1/2". Then, using a pencil and ruler, draw a 45 degree line at the corners of the four front-frame pieces. Then, continuing to use your Ultra-Saw, cut off the corners of the 4 strips of wood.
Paint and decorate the front of the frame and the perimeter pieces to your preference. Glue the four front-frame pieces of wood to the bottom of the frame and press firmly.
Next, go to https://3dprinter.dremel.com/3d-printing-model/mem ories-picture-frame-attachment to download the “Memories Picture Frame Attachment” model, or create your own 3D frame attachment. Simply create the model in the color of filament you prefer, or paint the model in a color other than the filament. Finally, glue the model to the front of the frame, add in your photograph and display anywhere in your home.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.
TOUR THE MAKER GALLERY
Explore the creations added to the Maker Gallery by Dremel Makers.