STEPS

7

SKILL LEVEL beginner

Beginner Intermediate Advanced
Build this colorful tic-tac-toe board with a Dremel Multi-Saw while the kids help print the X’s and O’s with the Dremel 3D Idea Builder. Paint the board bright colors, making a great indoor activity building and then playing as the weather turns cold.

by Dremel ®

200 PROJECTS

Grid View List View

Supplies Needed For This Project

TOOL

Dremel DigiLab 3D20

Model # 3D20-01

TOOL

SM20 Saw-Max Tool Kit

Model # SM20

ACCESSORY

SM500 Wood & Plastic Carbide Wheel

Model # SM500

ACCESSORY

Dremel MM70W Oscillating Sandpaper

Model # MM70W

ACCESSORY

Cotton White PLA Filament DF01-01

Model # DF01-01

Materials

  • 1

    1/4" Plywood
  • 1

    Ruler
  • 1

    Pencil
  • 1

    Tape
  • 2

    Paint- at least 2 colors
  • 1

    Paint brush

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

STEP 1

Begin by going to Dremel3D.com to download the models, from the "Tic-Tac-Toe Set"

STEP 2

STEP 2

While your pieces are printing, create your Tic-Tac-Toe board. Start by using your Dremel Saw-Max and SM500 accessory to cut a 14” square out of ¼” plywood.

STEP 3

STEP 3

Next, remove the sharp corners from the board. Do this by measuring 1 inch down from all four corners and drawing a line with a pencil. Cut this line using the Saw-Max again.

STEP 4

STEP 4

Then, smooth the edges of the plywood using the Dremel Multi-Max and sanding accessory. Continue sanding the top of the board to remove any rough area.

STEP 5

STEP 5

Once sanded, paint the board, keeping in mind you will need to paint lines over this color. The darker the board, the more coats you will need to for the lines to show through.

STEP 6

STEP 6

Once the paint on the board is dry, divide the board into nine squares, using a ruler and pencil. To create equal-sized squares, draw lines at 3 7/8 inches and 4 1/8 inches. As shown in the picture, place tape against the two lines, keeping the gap between the lines open to paint a distinguishing color. Repeating the same measurements from the first painted line, create two more parallel lines. Turn the board 90 degrees and repeat this two more times, making nine squares.

STEP 7

STEP 7

After the board is dry, gather the printed X’s and O’s and play a fun game of Tic-Tac-Toe.

Suggested Videos

Rotary Tools - How-To

Cutting Pegboard

989

Rotary Tool - DIY

Sharpening a Chainsaw

9519

Rotary Tools - DIY

Cutting Toilet Bolts

913

Other Projects You Might Like

Shoe Moulding
home repair
Shoe Moulding

2years ago

Keepsake Box
home decor
Keepsake Box

2years ago

Tire Planter
home decor
Tire Planter

3years ago

Tab Together Tote
laser engraving
Tab Together Tote

1year ago

No Promotion available!

TOUR THE MAKER GALLERY

Explore the creations added to the Maker Gallery by Dremel Makers.

No Promotion available!

A TOOL THAT CAN DO IT ALL

Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.

Comments(0)

Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.